Attention: Here be dragons

This is the latest (unstable) version of this documentation, which may document features not available in or compatible with released stable versions of Godot.

Checking the stable version of the documentation...

Resolution scaling

Why use resolution scaling?

With the ever-increasing rendering complexity of modern games, rendering at native resolution isn't always viable anymore, especially on lower-end GPUs.

Resolution scaling is one of the most direct ways to influence the GPU requirements of a scene. In scenes that are bottlenecked by the GPU (rather than by the CPU), decreasing the resolution scale can improve performance significantly. Resolution scaling is particularly important on mobile GPUs where performance and power budgets are limited.

While resolution scaling is an important tool to have, remember that resolution scaling is not intended to be a replacement for decreasing graphics settings on lower-end hardware. Consider exposing both resolution scale and graphics settings in your in-game menus.

参见

You can compare resolution scaling modes and factors in action using the 3D Antialiasing demo project.

备注

Resolution scaling is currently not available for 2D rendering, but it can be simulated using the viewport stretch mode. See 多分辨率 for more information.

Resolution scaling options

In the advanced Project Settings' Rendering > Scaling 3D section, you can find several options for 3D resolution scaling:

Scaling mode

• Bilinear: Standard bilinear filtering (default).

• FSR 1.0: AMD FidelityFX Super Resolution 1.0. Slower, but higher quality compared to bilinear scaling. On very slow GPUs, the cost of FSR 1.0 may be too expensive to be worth using it over bilinear scaling.

Here are comparison images between native resolution, bilinear scaling with 50% resolution scale and FSR 1.0 scaling with 50% resolution scale:

FSR 1.0 upscaling works best when coupled with another form of antialiasing. Temporal antialiasing (TAA) or multisample antialiasing (MSAA) should preferably be used in this case, as FXAA does not add temporal information and introduces more blurring to the image.

Here's the same comparison, but with 4× MSAA enabled on all images:

Notice how the edge upscaling of FSR 1.0 becomes much more convincing once 4× MSAA is enabled.

Rendering scale

The Rendering > Scaling 3D > Scale setting adjusts the resolution scale. 1.0 represents the full resolution scale, with the 3D rendering resolution matching the 2D rendering resolution. Resolution scales below 1.0 can be used to speed up rendering, at the cost of a blurrier final image and more aliasing.

The rendering scale can be adjusted at run-time by changing the scaling_3d_scale property on a Viewport node.

Resolution scales above 1.0 can be used for supersample antialiasing (SSAA). This will provide antialiasing at a very high performance cost, and is not recommended for most use cases. See 3D antialiasing for more information.

The tables below list common screen resolutions, the resulting 3D rendering resolution and the number of megapixels that need to be rendered each frame depending on the rendering scale option. Rows are sorted from fastest to slowest in each table.

备注

The resolution scale is defined on a per-axis basis. For example, this means that halving the resolution scale factor will reduce the number of rendered megapixels per frame by a factor of 4, not 2. Therefore, very low or very high resolution scale factors can have a greater performance impact than expected.

1920×1080 (Full HD)

Resolution scale factor	3D rendering resolution	Megapixels rendered per frame
0.50	960×540	0.52 MPix
0.67	1286×723	0.93 MPix
0.75	1440×810	1.17 MPix
0.85	1632×918	1.50 MPix
1.00 (native)	1920×1080	2.07 MPix
1.33 (supersampling)	2553×1436	3.67 MPix
1.50 (supersampling)	2880×1620	4.67 MPix
2.00 (supersampling)	3840×2160	8.29 MPix

2560×1440 (QHD)

Resolution scale factor	3D rendering resolution	Megapixels rendered per frame
0.50	1280×720	0.92 MPix
0.67	1715×964	1.65 MPix
0.75	1920×1080	2.07 MPix
0.85	2176×1224	2.66 MPix
1.00 (native)	2560×1440	3.69 MPix
1.33 (supersampling)	3404×1915	6.52 MPix
1.50 (supersampling)	3840×2160	8.29 MPix
2.00 (supersampling)	5120×2880	14.75 MPix

3840×2160 (Ultra HD "4K")

Resolution scale factor	3D rendering resolution	Megapixels rendered per frame
0.50	1920×1080	2.07 MPix
0.67	2572×1447	3.72 MPix
0.75	2880×1620	4.67 MPix
0.85	3264×1836	5.99 MPix
1.00 (native)	3840×2160	8.29 MPix
1.33 (supersampling)	5107×2872	14.67 MPix
1.50 (supersampling)	5760×3240	18.66 MPix
2.00 (supersampling)	7680×4320	33.18 MPix

FSR Sharpness

When using the FSR 1.0 scaling mode, the sharpness can be controlled using the Rendering > Scaling 3D > FSR Sharpness advanced project setting.

The intensity is inverted compared to most other sharpness sliders: lower values will result in a sharper final image, while higher values will reduce the impact of the sharpening filter. 0.0 is the sharpest, while 2.0 is the least sharp. The default value of 0.2 provides a balance between preserving the original image's sharpness and avoiding additional aliasing due to oversharpening.

备注

If you wish to use sharpening when rendering at native resolution, Godot currently doesn't allow using the sharpening component of FSR (RCAS) independently from the upscaling component (EASU).

As a workaround, you can set the 3D rendering scale to 0.99, set the scaling mode to FSR 1.0 then adjust FSR sharpness as needed. This allows using FSR 1.0 while rendering at a near-native resolution.

Mipmap bias

Godot automatically uses a negative texture mipmap bias when the 3D resolution scale is set below 1.0. This allows for better preservation of texture detail at the cost of a grainy appearance on detailed textures.

The texture LOD bias currently affects both 2D and 3D rendering in the same way. However, keep in mind it only has an effect on textures with mipmaps enabled. Textures used in 2D don't have mipmaps enabled by default, which means only 3D rendering is affected unless you enabled mipmaps on 2D textures in the Import dock.

The formula used to determine the texture mipmap bias is: TODO

To counteract the blurriness added by some antialiasing methods, Godot also adds a -0.25 offset when FXAA is enabled, and a -0.5 offset when TAA is enabled. If both are enabled at the same time, a -0.75 offset is used. This mipmap bias offset is applied before the resolution scaling offset, so it does not change depending on resolution scale.

The texture LOD bias can manually be changed by adjusting the Rendering > Textures > Default Filters > Texture Mipmap Bias advanced project setting. It can also be changed at run-time on Viewports by adjusting the texture_mipmap_bias property.

警告

Adjusting the mipmap LOD bias manually can be useful in certain scenarios, but this should be done carefully to prevent the final image from looking grainy in motion.

Negative mipmap LOD bias can also decrease performance due to higher-resolution mips having to be sampled further away. Recommended values for a manual offset are between -0.5 and 0.0.

Positive mipmap LOD bias will make mipmapped textures appear blurrier than intended. This may improve performance slightly, but is otherwise not recommended as the loss in visual quality is usually not worth the performance gain.

The example below shows an extreme case, with a mipmap LOD bias of -1.0 and anisotropic filtering disabled to make the difference more noticeable:

故障排除

Performance does not increase much when decreasing resolution scale

If performance doesn't increase much when decreasing resolution scale to a value like 0.5, it likely means the performance bottleneck is elsewhere in your scene. For example, your scene could have too many draw calls, causing a CPU bottleneck to occur. Likewise, you may have too many graphics effects enabled for your GPU to handle (such as SDFGI, SSAO or SSR).

See the 性能 tutorials for more information.