Attention: Here be dragons
This is the latest
(unstable) version of this documentation, which may document features
not available in or compatible with released stable versions of Godot.
Checking the stable version of the documentation...
NavigationServer2D¶
Inherits: Object
A server interface for low-level 2D navigation access.
描述¶
NavigationServer2D is the server that handles navigation maps, regions and agents. It does not handle A* navigation from AStar2D or AStarGrid2D.
Maps are made up of regions, which are made of navigation polygons. Together, they define the traversable areas in the 2D world.
Note: Most NavigationServer2D changes take effect after the next physics frame and not immediately. This includes all changes made to maps, regions or agents by navigation-related nodes in the scene tree or made through scripts.
For two regions to be connected to each other, they must share a similar edge. An edge is considered connected to another if both of its two vertices are at a distance less than edge_connection_margin
to the respective other edge's vertex.
You may assign navigation layers to regions with region_set_navigation_layers, which then can be checked upon when requesting a path with map_get_path. This can be used to allow or deny certain areas for some objects.
To use the collision avoidance system, you may use agents. You can set an agent's target velocity, then the servers will emit a callback with a modified velocity.
Note: The collision avoidance system ignores regions. Using the modified velocity directly may move an agent outside of the traversable area. This is a limitation of the collision avoidance system, any more complex situation may require the use of the physics engine.
This server keeps tracks of any call and executes them during the sync phase. This means that you can request any change to the map, using any thread, without worrying.
教程¶
Methods¶
信号¶
map_changed ( RID map )
Emitted when a navigation map is updated, when a region moves or is modified.
navigation_debug_changed ( )
Emitted when navigation debug settings are changed. Only available in debug builds.
Method Descriptions¶
RID agent_create ( )
Creates the agent.
bool agent_get_avoidance_enabled ( RID agent ) const
Return true
if the specified agent
uses avoidance.
RID agent_get_map ( RID agent ) const
Returns the navigation map RID the requested agent
is currently assigned to.
bool agent_get_paused ( RID agent ) const
Returns true
if the specified agent
is paused.
bool agent_is_map_changed ( RID agent ) const
Returns true if the map got changed the previous frame.
void agent_set_avoidance_callback ( RID agent, Callable callback )
Sets the callback Callable that gets called after each avoidance processing step for the agent
. The calculated safe_velocity
will be dispatched with a signal to the object just before the physics calculations.
Note: Created callbacks are always processed independently of the SceneTree state as long as the agent is on a navigation map and not freed. To disable the dispatch of a callback from an agent use agent_set_avoidance_callback again with an empty Callable.
void agent_set_avoidance_enabled ( RID agent, bool enabled )
If enabled
is true
, the specified agent
uses avoidance.
void agent_set_avoidance_layers ( RID agent, int layers )
Set the agent's avoidance_layers
bitmask.
void agent_set_avoidance_mask ( RID agent, int mask )
Set the agent's avoidance_mask
bitmask.
void agent_set_avoidance_priority ( RID agent, float priority )
Set the agent's avoidance_priority
with a priority
between 0.0 (lowest priority) to 1.0 (highest priority).
The specified agent
does not adjust the velocity for other agents that would match the avoidance_mask
but have a lower `` avoidance_priority``. This in turn makes the other agents with lower priority adjust their velocities even more to avoid collision with this agent.
void agent_set_map ( RID agent, RID map )
Puts the agent in the map.
void agent_set_max_neighbors ( RID agent, int count )
Sets the maximum number of other agents the agent takes into account in the navigation. The larger this number, the longer the running time of the simulation. If the number is too low, the simulation will not be safe.
void agent_set_max_speed ( RID agent, float max_speed )
Sets the maximum speed of the agent. Must be positive.
void agent_set_neighbor_distance ( RID agent, float distance )
Sets the maximum distance to other agents this agent takes into account in the navigation. The larger this number, the longer the running time of the simulation. If the number is too low, the simulation will not be safe.
void agent_set_paused ( RID agent, bool paused )
If paused
is true the specified agent
will not be processed, e.g. calculate avoidance velocities or receive avoidance callbacks.
void agent_set_position ( RID agent, Vector2 position )
Sets the position of the agent in world space.
void agent_set_radius ( RID agent, float radius )
Sets the radius of the agent.
void agent_set_time_horizon_agents ( RID agent, float time_horizon )
The minimal amount of time for which the agent's velocities that are computed by the simulation are safe with respect to other agents. The larger this number, the sooner this agent will respond to the presence of other agents, but the less freedom this agent has in choosing its velocities. A too high value will slow down agents movement considerably. Must be positive.
void agent_set_time_horizon_obstacles ( RID agent, float time_horizon )
The minimal amount of time for which the agent's velocities that are computed by the simulation are safe with respect to static avoidance obstacles. The larger this number, the sooner this agent will respond to the presence of static avoidance obstacles, but the less freedom this agent has in choosing its velocities. A too high value will slow down agents movement considerably. Must be positive.
void agent_set_velocity ( RID agent, Vector2 velocity )
Sets velocity
as the new wanted velocity for the specified agent
. The avoidance simulation will try to fulfill this velocity if possible but will modify it to avoid collision with other agent's and obstacles. When an agent is teleported to a new position far away use agent_set_velocity_forced instead to reset the internal velocity state.
void agent_set_velocity_forced ( RID agent, Vector2 velocity )
Replaces the internal velocity in the collision avoidance simulation with velocity
for the specified agent
. When an agent is teleported to a new position far away this function should be used in the same frame. If called frequently this function can get agents stuck.
void free_rid ( RID rid )
Destroys the given RID.
bool get_debug_enabled ( ) const
Returns true
when the NavigationServer has debug enabled.
RID[] get_maps ( ) const
Returns all created navigation map RIDs on the NavigationServer. This returns both 2D and 3D created navigation maps as there is technically no distinction between them.
RID link_create ( )
Create a new link between two positions on a map.
bool link_get_enabled ( RID link ) const
Returns true
if the specified link
is enabled.
Vector2 link_get_end_position ( RID link ) const
Returns the ending position of this link
.
float link_get_enter_cost ( RID link ) const
Returns the enter cost of this link
.
RID link_get_map ( RID link ) const
Returns the navigation map RID the requested link
is currently assigned to.
int link_get_navigation_layers ( RID link ) const
Returns the navigation layers for this link
.
int link_get_owner_id ( RID link ) const
Returns the ObjectID
of the object which manages this link.
Vector2 link_get_start_position ( RID link ) const
Returns the starting position of this link
.
float link_get_travel_cost ( RID link ) const
Returns the travel cost of this link
.
bool link_is_bidirectional ( RID link ) const
Returns whether this link
can be travelled in both directions.
void link_set_bidirectional ( RID link, bool bidirectional )
Sets whether this link
can be travelled in both directions.
void link_set_enabled ( RID link, bool enabled )
If enabled
is true
, the specified link
will contribute to its current navigation map.
void link_set_end_position ( RID link, Vector2 position )
Sets the exit position for the link
.
void link_set_enter_cost ( RID link, float enter_cost )
Sets the enter_cost
for this link
.
void link_set_map ( RID link, RID map )
Sets the navigation map RID for the link.
void link_set_navigation_layers ( RID link, int navigation_layers )
Set the links's navigation layers. This allows selecting links from a path request (when using map_get_path).
void link_set_owner_id ( RID link, int owner_id )
Set the ObjectID
of the object which manages this link.
void link_set_start_position ( RID link, Vector2 position )
Sets the entry position for this link
.
void link_set_travel_cost ( RID link, float travel_cost )
Sets the travel_cost
for this link
.
RID map_create ( )
Create a new map.
void map_force_update ( RID map )
This function immediately forces synchronization of the specified navigation map
RID. By default navigation maps are only synchronized at the end of each physics frame. This function can be used to immediately (re)calculate all the navigation meshes and region connections of the navigation map. This makes it possible to query a navigation path for a changed map immediately and in the same frame (multiple times if needed).
Due to technical restrictions the current NavigationServer command queue will be flushed. This means all already queued update commands for this physics frame will be executed, even those intended for other maps, regions and agents not part of the specified map. The expensive computation of the navigation meshes and region connections of a map will only be done for the specified map. Other maps will receive the normal synchronization at the end of the physics frame. Should the specified map receive changes after the forced update it will update again as well when the other maps receive their update.
Avoidance processing and dispatch of the safe_velocity
signals is untouched by this function and continues to happen for all maps and agents at the end of the physics frame.
Note: With great power comes great responsibility. This function should only be used by users that really know what they are doing and have a good reason for it. Forcing an immediate update of a navigation map requires locking the NavigationServer and flushing the entire NavigationServer command queue. Not only can this severely impact the performance of a game but it can also introduce bugs if used inappropriately without much foresight.
RID[] map_get_agents ( RID map ) const
Returns all navigation agents RIDs that are currently assigned to the requested navigation map
.
float map_get_cell_size ( RID map ) const
Returns the map cell size used to rasterize the navigation mesh vertices.
Vector2 map_get_closest_point ( RID map, Vector2 to_point ) const
Returns the point closest to the provided to_point
on the navigation mesh surface.
RID map_get_closest_point_owner ( RID map, Vector2 to_point ) const
Returns the owner region RID for the point returned by map_get_closest_point.
float map_get_edge_connection_margin ( RID map ) const
Returns the edge connection margin of the map. The edge connection margin is a distance used to connect two regions.
float map_get_link_connection_radius ( RID map ) const
Returns the link connection radius of the map. This distance is the maximum range any link will search for navigation mesh polygons to connect to.
RID[] map_get_links ( RID map ) const
Returns all navigation link RIDs that are currently assigned to the requested navigation map
.
RID[] map_get_obstacles ( RID map ) const
Returns all navigation obstacle RIDs that are currently assigned to the requested navigation map
.
PackedVector2Array map_get_path ( RID map, Vector2 origin, Vector2 destination, bool optimize, int navigation_layers=1 ) const
Returns the navigation path to reach the destination from the origin. navigation_layers
is a bitmask of all region navigation layers that are allowed to be in the path.
RID[] map_get_regions ( RID map ) const
Returns all navigation regions RIDs that are currently assigned to the requested navigation map
.
bool map_get_use_edge_connections ( RID map ) const
Returns whether the navigation map
allows navigation regions to use edge connections to connect with other navigation regions within proximity of the navigation map edge connection margin.
bool map_is_active ( RID map ) const
Returns true if the map is active.
void map_set_active ( RID map, bool active )
Sets the map active.
void map_set_cell_size ( RID map, float cell_size )
Sets the map cell size used to rasterize the navigation mesh vertices. Must match with the cell size of the used navigation meshes.
void map_set_edge_connection_margin ( RID map, float margin )
Set the map edge connection margin used to weld the compatible region edges.
void map_set_link_connection_radius ( RID map, float radius )
Set the map's link connection radius used to connect links to navigation polygons.
void map_set_use_edge_connections ( RID map, bool enabled )
Set the navigation map
edge connection use. If enabled
is true
, the navigation map allows navigation regions to use edge connections to connect with other navigation regions within proximity of the navigation map edge connection margin.
RID obstacle_create ( )
Creates a new navigation obstacle.
bool obstacle_get_avoidance_enabled ( RID obstacle ) const
Returns true
if the provided obstacle
has avoidance enabled.
RID obstacle_get_map ( RID obstacle ) const
Returns the navigation map RID the requested obstacle
is currently assigned to.
bool obstacle_get_paused ( RID obstacle ) const
Returns true
if the specified obstacle
is paused.
void obstacle_set_avoidance_enabled ( RID obstacle, bool enabled )
If enabled
is true
, the provided obstacle
affects avoidance using agents.
void obstacle_set_avoidance_layers ( RID obstacle, int layers )
Set the obstacles's avoidance_layers
bitmask.
void obstacle_set_map ( RID obstacle, RID map )
Sets the navigation map RID for the obstacle.
void obstacle_set_paused ( RID obstacle, bool paused )
If paused
is true the specified obstacle
will not be processed, e.g. affect avoidance velocities.
void obstacle_set_position ( RID obstacle, Vector2 position )
Sets the position of the obstacle in world space.
void obstacle_set_radius ( RID obstacle, float radius )
Sets the radius of the dynamic obstacle.
void obstacle_set_velocity ( RID obstacle, Vector2 velocity )
Sets velocity
of the dynamic obstacle
. Allows other agents to better predict the movement of the dynamic obstacle. Only works in combination with the radius of the obstacle.
void obstacle_set_vertices ( RID obstacle, PackedVector2Array vertices )
Sets the outline vertices for the obstacle. If the vertices are winded in clockwise order agents will be pushed in by the obstacle, else they will be pushed out.
void query_path ( NavigationPathQueryParameters2D parameters, NavigationPathQueryResult2D result ) const
Queries a path in a given navigation map. Start and target position and other parameters are defined through NavigationPathQueryParameters2D. Updates the provided NavigationPathQueryResult2D result object with the path among other results requested by the query.
RID region_create ( )
Creates a new region.
Vector2 region_get_connection_pathway_end ( RID region, int connection ) const
Returns the ending point of a connection door. connection
is an index between 0 and the return value of region_get_connections_count.
Vector2 region_get_connection_pathway_start ( RID region, int connection ) const
Returns the starting point of a connection door. connection
is an index between 0 and the return value of region_get_connections_count.
int region_get_connections_count ( RID region ) const
Returns how many connections this region
has with other regions in the map.
bool region_get_enabled ( RID region ) const
Returns true
if the specified region
is enabled.
float region_get_enter_cost ( RID region ) const
Returns the enter cost of this region
.
RID region_get_map ( RID region ) const
Returns the navigation map RID the requested region
is currently assigned to.
int region_get_navigation_layers ( RID region ) const
Returns the region's navigation layers.
int region_get_owner_id ( RID region ) const
Returns the ObjectID
of the object which manages this region.
float region_get_travel_cost ( RID region ) const
Returns the travel cost of this region
.
bool region_get_use_edge_connections ( RID region ) const
Returns whether the navigation region
is set to use edge connections to connect with other navigation regions within proximity of the navigation map edge connection margin.
bool region_owns_point ( RID region, Vector2 point ) const
Returns true
if the provided point
in world space is currently owned by the provided navigation region
. Owned in this context means that one of the region's navigation mesh polygon faces has a possible position at the closest distance to this point compared to all other navigation meshes from other navigation regions that are also registered on the navigation map of the provided region.
If multiple navigation meshes have positions at equal distance the navigation region whose polygons are processed first wins the ownership. Polygons are processed in the same order that navigation regions were registered on the NavigationServer.
Note: If navigation meshes from different navigation regions overlap (which should be avoided in general) the result might not be what is expected.
void region_set_enabled ( RID region, bool enabled )
If enabled
is true
the specified region
will contribute to its current navigation map.
void region_set_enter_cost ( RID region, float enter_cost )
Sets the enter_cost
for this region
.
void region_set_map ( RID region, RID map )
Sets the map for the region.
void region_set_navigation_layers ( RID region, int navigation_layers )
Set the region's navigation layers. This allows selecting regions from a path request (when using map_get_path).
void region_set_navigation_polygon ( RID region, NavigationPolygon navigation_polygon )
Sets the navigation_polygon
for the region.
void region_set_owner_id ( RID region, int owner_id )
Set the ObjectID
of the object which manages this region.
void region_set_transform ( RID region, Transform2D transform )
Sets the global transformation for the region.
void region_set_travel_cost ( RID region, float travel_cost )
Sets the travel_cost
for this region
.
void region_set_use_edge_connections ( RID region, bool enabled )
If enabled
is true
, the navigation region
will use edge connections to connect with other navigation regions within proximity of the navigation map edge connection margin.
void set_debug_enabled ( bool enabled )
If true
enables debug mode on the NavigationServer.